17 GB
Using the LED torch
To switch on the light, press and hold the
Display / LED button
5
on the side of
the product about 2 seconds.
Press and hold the Display / LED button
5
again to switch the light OFF again.
Troubleshooting
= Problem
= Cause
= Solution
The power bank
6
is not being
charged.
It may be that the power bank is not
connected properly.
Check that it is connected.
A connected device is not being
charged.
The battery is drained.
Charge the battery.
The device is not connected.
Check that it is connected.
Lightly press the Display / LED button
5
to begin the charging process.
To Next Page
Loading...
