To Next PageTo Next PageWhat to do if Silvercrest RCR DP3 3711-A have no reaction?
If your Silvercrest Accessories aren't responding, ensure the appliance is switched on. If that doesn't work, try assigning a new code to the wireless socket. Also, make sure the device is within the correct range by moving closer to it.
Why is the range too small for my Silvercrest RCR DP3 3711-A Accessories?
To maximize the range of your Silvercrest Accessories, minimize obstructions between the remote controller and the remote-controlled socket. Obstructions include walls, furniture, trees, and bushes.
What to do if Silvercrest RCR DP3 3711-A Accessories remote control illuminates but there is no reaction?
If the operating indicator on your Silvercrest Accessories remote control lights up but nothing happens, verify the battery's current output. Replace the battery if necessary.
How to fix no indicator light on Silvercrest Accessories remote control?
If the indicator light doesn't turn on when pressing the 'ON' or 'OFF' button on your Silvercrest Accessories remote control, check that the battery has been inserted correctly and ensure the battery has good contact by pressing down on it if needed.
General| Brand | Silvercrest |
|---|---|
| Model | RCR DP3 3711-A |
| Category | Accessories |
| Language | English |
The radio-controlled socket set is suitable for switching electrical devices outside on and off by remote control.
Connect to earthed sockets, avoid overloading, and do not expose device to direct sunlight.
DANGER TO LIFE! Keep batteries out of reach of children. Seek medical attention if swallowed.
Open compartment, insert CR 2032 battery with correct polarity, close cover, test functionality.
Plug socket into earthed mains socket, ensure correct orientation, point remote and push ON button.
Use ALL-ON/OFF button for simultaneous control. Troubleshoot issues like no reaction or no indicator light.
