Silvercrest RCR DP3 3711-A - Page 52

53 GB/MT
Setting-up operation
Prob-
lem
No reaction from
consumer
Rem-
edy
· Check that the appli-
ance is switched on.
· Assign a new code to
the wireless socket (see
“Setting up the wireless
socket”).
· Check - by walking
closer to it - that the
range is correct for
the desired location.
Prob-
lem
Range is too small
Rem-
edy
· For the greatest range
make sure that there
are as few potential
obstructions as possi-
ble (not only walls,
furniture etc. but also
trees, bushes etc.) be-
tween the remote con-
troller and the remote-
controlled socket.