OFFS
Adapt the temperature to local characteris-
tics or temperature perception
STBY
Standby mode
VERS
Version number
Inserting the Batteries
1� Remove the battery compartment cover�
Only use batteries of the type specied in the Section "Tech-
nical Data" to operate the device� Do not use rechargeable
batteries to operate the device�
Attention! Risk of damage to the de-
vice through reverse poling when insert-
ing the batteries� Pay attention the batter-
ies are correctly aligned when inserted�
2� Insert the batteries (2 x mignon, AA) in the battery com-
partment paying attention to correct polarity�
3� Replace the battery compartment cover�
4� Set the date and time. Conrm by pressing
OK
�
The battery icon appears when the batteries need to be
changed�
PREP appears on the display� Wait a moment while the de-
vice prepares itself for installation� As soon as the device is
ready for installation, INST appears on the display�
To Next Page
Loading...
