Troubleshooting
The equipment does not function as you want! Try and solve
the problem with the aid of the solutions proposed below�
Caution! Risk of burns through
hot radiator valve! Contact could
lead to hands being burned�
Allow the radiator to cool down before
completing any installation, disassembly
or repair work on the device! Wear work
gloves!
Battery icon appears in the display� Change
the batteries�
Fault message E1 appears in the display�
Adaptation of the device is not possible� Is the device
correctly assembled on the radiator? Follow the
instructions in Section Installation ob pagina 37�
Due to the continuous thread, the pressure
piece tted on the underside can drop out if
the regulator has not been mounted on the
valve� Insert the pressure piece� The continuous
thread turns and tightens the pressure piece� Fit
the device on the radiator and perform an adaptation�
Fault message E2 appears in the display�
The radiator valve stroke is too short or the battery
power is too weak� Adapt the device once again�
Change the batteries�
To Next Page
Loading...
