Silvercrest SADH 12 C2 - Appliance Operation Controls; Mist, Colour, and Timer Functions

■ 12
│
GB
│
IE SADH 12 B2 / SADH 12 C2
Switching the appliance on/off and setting
the colour change and timer functions
♦ Press the button 0 to switch on the appliance. Aromatic mist
production starts.
♦ Press the
button9 to start the colour change function.
Illumination of the buttons appears in the current colour.
♦ Press the
button9 again to set and maintain the current
colour. Pressing the button 9 repeatedly lets you choose
your favourite colour.
♦ Hold down the
button 9 for two seconds to switch off the
illumination.
♦ Press the
button q to start the timer function at 1 hour (1h).
Press the button q repeatedly to set the timer function to
3 hours (3h) or 6 hours (6h) or to switch the timer function off
completely. The blue LED shows the set time. If no LED is lit,
the timer function is switched off. The appliance switches off
automatically when the set time has elapsed.
♦ If the appliance is switched on, press the
button0 to switch
the appliance off immediately. Aromatic mist production and
any illumination that may be activated are switched off.
NOTICE
► The appliance switches itself off automatically as soon as the
liquid in the water tank 3 has been used up.