25
GB
Remove transport protection
The device is delivered with two transport
protection elements located on the under-
side.
• Remove these transport protection ele-
ments by pulling them off the underside.
6. Assembly
DANGER! Risk of injury!
~ Unplug the mains plug22 before as-
sembling or disassembling the vacuum
cleaner.
Inserting/removing the hose
• Insert the hose1 into the connection
opening8 on the top of the device. The
hose must audibly click into place.
• To remove the hose1 press the two re-
lease buttons6 and pull out.
Attaching the telescopic tube
• Insert the hose1 with the handle16
into the upper end of the telescopic
tube14. For a better grip, turn the han-
dle slightly back and forth.
• It is best to turn the telescopic tube14
so that the slider13 points upwards.
This will make it easier for you to oper-
ate later.
__437427_2304_Bodenstaubsauger_B8.book Seite 25 Dienstag, 13. Juni 2023 11:10 11
To Next Page
Loading...
