Silvercrest SBBK 700 A2 - Adjusting the Length of the Telescopic Tube; Using the Nozzle

26
GB
Attaching/removing the nozzle
• All nozzles can be attached directly to
the handle16 of the hose1 as well as
to the lower end of the telescopic
tube14.
• Plug in the desired nozzle. Turn the noz-
zle slightly back and forth for a better
grip.
• To remove, gently turn the nozzle back
and forth and pull it.
Adjusting the length of the
telescopic tube
1. Push down the slider13 on the tele-
scopic tube14 and set the desired
length.
2. Release the slider13 and continue to
move the telescopic tube14 until it
clicks into place.
7. Using the nozzle
Here, you will find an overview of the clean-
ing tasks for which the various nozzles are
particularly suitable.
Floorhead12
Suitable for carpets and smooth floors.
Switch between the two functions using the
foot button11.
- For smooth floors
such as tiles, tilt the
foot button11 to the
„brush extended“
symbol. The brush on
the underside is ex-
tended.
- For carpets, tilt the
foot button11 to the
„brush retracted“
symbol. The brush is
retracted.
13
11
11
__437427_2304_Bodenstaubsauger_B8.book Seite 26 Dienstag, 13. Juni 2023 11:10 11