16 GB
headphones. Using the and buttons
6
7
on the headphones allows
the volume to be adjusted. Music is played back through the speakers
2
.
The control panel has 4 buttons. These control the following functions:
Button Function
– Press and hold to switch the device on / off.
– Press once to play / stop music playback.
– Press once to increase the volume by one level. One signal
tones will sound when the maximum volume has been
reached.
– Press and hold approx. 2 seconds to skip to the next track.
– Press once to reduce the volume by one level.
– One signal tone will sound when the minimum volume has
been reached.
– During playback, press and hold approx. 2 seconds to jump
to the previous track.
–
In paired mode (LED flash white twice every 3 seco
nds), press
and hold for approx. 2 seconds and acoustic signal sounds to
change to pairing mode to allow another communication de-
vice for connection.
– In pairing mode (LED flash red and white), briefly press and
long acoustic signal sounds to connect to the previous paired
communication device again.
Headphones button functions
as a headset
You may also use the headphones for telephone calls when used with a com-
munication device which supports this function.
If your communication device supports the Bluetooth
®
standard 4.0, you will
be able to use the following functions:
To Next Page
Loading...
Need help?
General
