Silvercrest SBKP 4 A1 - Headphones Button Functions as a Headset

17 GB
Button Function
– In paired mode (LED indicator
7
flash blue twice
every 5 seconds), press and hold for approx. 3 sec-
onds and acoustic signal sounds to change to pairing
mode to allow another communication device for con-
nection.
– In pairing mode (LED indicator
7
flash blue and white),
briefly press and acoustic signal sounds to connect to
the previous paired communication device again.
Headphones button functions as a headset
You may also use the headphones for telephone calls when used with
a communication device which supports this function. If your communi-
cation device supports the Bluetooth
®
standard 5.0, you will be able
to use the following functions:
Function Action
Answer / end call
Briefly press the
button
5
Ignore call
H
old the button
5
approx. 2 seconds
until two beep sounds
Redial
Briefly press the
button
5
twice
Increase volume
Briefly Press
button
4
(one signal t one
will sound when the maximum volume
has been reached)
Reduce volume
Briefly Press
button
6
(one signal tone
will sound when the minimum volume
has been reached)