18 GB
Function Action
Send the call from the
headphones to the mobile
Briefly press the
button
5
twice
Send the call from the
mobile to the headphones
Briefly press the
button
5
twice
End the current call and
answer call waiting*
Briefly press the
button
5
Switch between two calls
(toggle)*
H
old the button
5
approx. 2 seconds
until it beeps.
*These functions must be supported by your mobile service provider.
– When there is incoming call, the LED indicator
7
will briefly flash
blue two times per second.
–
The ringer and the caller‘s voice are rendered through the speakers
1
.
– Music playback is automatically paused when a call is received.
– The microphone
8
records your voice.
– Music continues after the call has been ended.
Note: No headset function while using AUX cable
12
.
Connecting the headphones
through AUX cable
Insert the AUX cable (3.5 mm)
12
into the AUX IN
9
and other
3.5 mm jack plug in to the 3.5 mm jack connection socket of your
playback device.
Start a playlist on your playback device. You can only adjust the
music volume on the playback device.
Note: Music playback via AUX cable takes priority over music
playback via Bluetooth
®
. Music playback from a Bluetooth
®
To Next Page
Loading...
