15 GB
Connecting the headphones to
a second Bluetooth
®
device
The headphones may be connected to two Bluetooth
®
communication
devices at the same time. If the headphones are already connected to
a device, follow the steps below to connect to the second device:
Activate multipoint mode by pressing and holding button
2
for approx. 3 seconds. Acoustic signal sounds. The first communi-
cation device (mobile phone or computer) is disconnected.
Now connect to the second communication device via Bluetooth
®
with the headphones. Please refer to the notes in the instructions
for your communication device. Select the entry “SBKP 4 A1“ from
the list of devices detected by your computer or mobile. The second
communication device is connected.
Briefly press button
2
and acoustic signal sounds. The first
communication device is connected again. Now, both communica-
tion devices are connected to the headphones simultaneously.
Clearing paired devices
In paired mode (the LED indicator
7
will briefly flash blue twice
every 5 seconds), press and hold
button
2
for 3 seconds and
acoustic signal sounds.
The headphones is now in pairing mode. The LED indicator
7
flashes blue and white.
Press and hold button
2
for approx. 3 seconds and two
beeps sound.
The memory in the headphones is cleared. After clearing the
paired memory, it will not automatically connect the device you
used before, need to pair again manually.
To Next Page
Loading...
