Silvercrest SBL 3 D2

SilverCrest SBL 3 D2
US-EN - 29
• During the charging process, the battery indicator (11) flashes.
After the charging process is completed, the battery indicator
(11) lights up.
• After charging, disconnect the charging cable (B) and close the
cover of the USB charging port (6).
A low battery level is indicated by the flashing battery
indicator (11). In addition, you can hear a beep.
9. Getting started
9.1 Switching the speaker on and off
Press and hold the button (1) for 2 seconds to switch on the
speaker. A tone sequence is output. The speaker starts in the last
used mode.