Silvercrest SBL 3 D2

SilverCrest SBL 3 D2
38 – US-EN
When the alarm is activated, “AL” (14) lights up
permanently in the display.
9.9 Stopping the alarm sound
While the alarm sound is played, the time (10) flashes on the
display (2). The alarm tone switches off automatically after approx.
one minute. Press any button to stop the alarm sound manually.
10. Troubleshooting
The speaker does not turn on
• The speaker’s battery is dead. Recharge the battery.
No Bluetooth
®
connection is established
• Check if the speaker is turned on and Bluetooth
®
mode is active.
If necessary, switch on the speaker or activate the Bluetooth
®
mode.