Silvercrest SBL 3 D2 User Manual

SilverCrest SBL 3 D2
36 – US-EN
• Power on the speaker by pressing and holding the button (1)
for approx. 2 seconds.
• Press the M button (9) repeatedly until “AL” (14) flashes on the
display (2) and (12) or “FM” (13) goes out.
• Press and hold the ▸II button (5) for approx. 2 seconds.
• Use the I◂◂ (8) and ▸▸I (4) buttons to select “ON” or “OFF”.
• Briefly press the ▸II (5) button.
• If “ON” has been selected, the hour indicator flashes. Now you
can use the I◂◂ (8) and ▸▸I (4) buttons to set the hour. You can
keep the buttons pressed to accelerate the digits count. To accept
the setting, briefly press the ▸II button (5).
• The minute indicator flashes. Now you can use the I◂◂ (8) and
▸▸I (4) buttons to set the minutes. You can keep the buttons
pressed to accelerate the digits count. To accept the setting,
briefly press the ▸II button (5).

Silvercrest SBL 3 D2 Specifications

General

Brand	Silvercrest
Model	SBL 3 D2
Category	Speakers
Language	English