Silvercrest SBL 4 A2 - Switching between AUX-IN Connection and the Bluetooth Connection

24 GB
2 seconds until the signal LED lights blue
and a signal tone sequence sounds.
Start playback on the sound source and
adjust the volume to the highest possible
volume. Adjust the volume on the speaker
using the
button
10
(up) or the
button
8
(do wn).
Start playing music on the sound source.
Switching between
AUX-IN connection and the
Bluetooth
®
connection
To resume music playback via Bluetooth
®
connection, please unplug the jack lead
13
from the speaker. It will search for the previously
paired device (if any) and re-establish the
Bluetooth
®
connection automatically.
AUX-IN connection has a higher priority over
the Bluetooth
®
connection as following:
Once the jack lead
13
is plugged into
the jack
2
, the Bluetooth
®
wireless con-
nection is disconnected. The music