Silvercrest SBLL 4.2 A1 User Manual

SilverCrest SBLL 4.2 A1
English - 11
not work properly or has been dropped. If you notice
any smoke, unusual noises or smells, immediately switch
off the speaker and unplug any cables that may be
connected to the device. If this happens, you must stop
using the speaker until it has been checked by a
specialist. All repair work should only be carried out by
qualified specialists. Clean the device using a clean, dry
cloth and never use abrasive liquids. Do not try to open
the housing of the speaker, as this will void your
guarantee.
Copyright
All contents of these operating instructions are subject to
copyright law and are provided to the user solely as a
source of information. Any form of copying or
reproduction of data and information without the
express written permission of the author is prohibited.
This also concerns commercial use of the content and
data. The text and illustrations correspond to the
technical standards at the time of printing. Subject to
alterations.
Overview
These operating instructions also have a cover that can
be unfolded. Unfold this cover page so that you can
always see the controls.

Silvercrest SBLL 4.2 A1 Specifications

General

Brand	Silvercrest
Model	SBLL 4.2 A1
Speaker Type	Portable Bluetooth Speaker
Bluetooth Version	4.2
Frequency Response	100 Hz - 20 kHz
Charging Time	3 hours
Battery Capacity	1200 mAh