Silvercrest SBLL 4.2 A1 - Button

SilverCrest SBLL 4.2 A1
16 - English
 The first 99 stations found will be stored directly in
memory positions 1 to 99. The station stored under
memory position 1 is played.
 You can turn the speaker off by setting the ON/OFF
switch (6) to the ‘OFF’ position.
Please note that memory positions already
occupied will be overwritten.
It is not possible to set a station manually.
The buttons on the speaker perform the following
functions in radio mode:
Function Action
Start station scanning Briefly press the
button (2)
Next memory position Briefly press the
button (5)
Previous memory
position
Briefly press the
button (4)
Volume up* Hold down the
button (5)
Volume down Hold down the
button (4)
Changing the operating
mode
Briefly press the M
button (3)
* An acoustic signal is played when the maximum
volume is reached.