Silvercrest SCAW 5.00 B2 - Date Stamp; Face Detection

SilverCrest SCAW 5.00 B2
250 - English
Date Stamp
This function allows you to show the date and time of the recording in the bottom right corner
of a picture.
 Use the right or left navigation button (6) to select the
icon.
 Press the centre navigation button (6) to confirm your selection.
The following settings are available:
Disables the date stamp.
Enables the date stamp.
 Use the right or left navigation button (6) to select the setting you want.
 Press the centre navigation button (6) to confirm your selection.
After the date stamp has been enabled, it is not possible to remove it from
the recording. You should therefore check if the date and time are properly
set prior to recording.
Face Detection
This function detects faces and optimises the capture accordingly.
 Use the right or left navigation button (6) to select the
icon.
 Press the centre navigation button (6) to confirm your selection.
The following settings are available:
Disables face detection.
Enables face detection.
 Use the right or left navigation button (6) to select the setting you want.
 Press the centre navigation button (6) to confirm your selection.