Silvercrest SDBK 2400 F5 - Trouble-shooting; Technical Specifications

26
GB
11. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~ Do not attempt to repair the device your-
self under any circumstances.
12. Technical
specifications
Symbols used
Subject to technical modifications.
Fault Possible causes/Action
No
function
• Connect the device to the
mains power supply.
• Use the temperature control-
ler17 to turn up the temper-
ature.
Little or
no steam
•Fill the water tank15 to at
least one quarter full.
• Switch on the steam flow
rate controller3
().
• Run the self-cleaning cycle.
Steam
burst is
not work-
ing.
•Fill the water tank15 to at
least one quarter full.
• Set the right temperature.
•Leave a pause of a few sec-
onds between steam bursts.
Spray
burst is
not work-
ing.
•Fill the water tank15 to at
least one quarter full.
•For the first spray burst, you
need to pump several times.
Model: SDBK 2400 F5
Mains voltage: 220 - 240 V ~ 50/60 Hz
Protection class: I
Power rating: 2,000 - 2,400 W
Certified Safety. Devices must
comply with the generally ac-
knowledged rules of technology
and the German Product Safety
Act (Produktsicherheitsgesetz -
ProdSG).
With the CE marking,
HOYERHandel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials: cardboard
(except corrugated cardboard)
__317392_Dampfbuegeleisen_B8.book Seite 26 Donnerstag, 20. Juni 2019 1:08 13