10 GB/IE/NI
Do not operate the product with
wet hands or while standing on a
wet floor. Do not touch the power
plug with wet hands.
Stop using the product if the anti-
kink protection on the power cord
is damaged!
Cleaning and storage
Always turn off the product
before disconnecting it from the
power supply.
Do not pull the power plug out
of the wall socket by the power
cord. Do not wrap the power
cord around the product.
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water.
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children.
Protect the product against heat.
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances.
Before first use
Remove all packaging materials. Check if all
parts are complete.
Assembly
Unfolding/folding the handle
Handle
1
Unfolding
Unfold the handle until it clicks in
place.
Folding
Press the folding button
25
. Then,
fold the handle downwards.
Attaching the steam foot
Align the locking hole of the steam foot
16
with
the release lever
17
.
Push in the steam foot
16
until it locks in place.
NOTE:
The angle of the steam foot
16
can be adjusted:
Steam foot
16
Release steam
foot
Gently step on the steam foot. Pull
the main body backwards.
Lock steam
foot
Pull the main body forward until the
steam foot
locks in place.
Do not force the steam foot
16
onto the main
unit. Always use both hands while connecting the
parts.
Microfiber cloth installation
(for cleaning floors)
Place the microfiber cloth
14
on the
steam
foot
16
. Align the hook-and-loop straps of the
microfiber cloth with the hooks on the steam foot.
Carpet glider installation
(for cleaning carpets)
Attach the microfiber cloth
14
. Place the carpet
glider
15
onto the steam foot
16
until it locks in
place.
To Next Page
Loading...
