12 GB/IE/NI
Power knob
21
On/off
Turn in clockwise direction Turn the product on.
The light indicator
19
turns green.
Turn in counter-clockwise
direction to “0” position.
Turn the product off.
The light indicator
19
goes off.
NOTES:
The product needs around 30seconds to
preheat. After preheating, the pump starts
operating. The steam runs continuously until the
water tank
18
is empty.
When the product is powered on, it should not be
pointed towards equipments containing electrical
components (such as the interior of ovens).
The product has to be unplugged
– after use,
– before cleaning and
– before maintaining
the product.
Adjusting the steam power
Power knob
21
Steam power
Turn in clockwise direction Increase steam power
Turn in counter-clockwise
direction
Decrease steam power
Pump safety shutdown
When the water tank
18
is empty, the pump
keeps operating for about 1minute. Then, it shuts
down.
The light indicator
19
changes from continuous
green to flashing red colour.
Turn off the product. Refill the water tank
18
to
proceed with the operation.
Cleaning and care
Cleaning the main unit
mDANGER! Risk of electric shock!
Disconnect the power plug
23
from the wall
socket before cleaning the product.
mWARNING! Do not immerse the product’s
electrical components in water or other liquids.
Never hold the product under running water.
Wipe down the product with a slightly damp
cloth.
Do not let any water or other liquids enter the
product interior.
Do not use any abrasive, aggressive cleaners or
hard brushes to clean the product.
After cleaning: Let all parts dry completely.
Cleaning the accessories
Clean the accessories in warm, soapy water.
After cleaning: Let all accessories dry completely.
Cleaning the microfiber cloths and
microfiber cover
The microfiber cloths
14
and the microfiber
cover
8
can be cleaned in a washing machine and
in a dry cleaner.
Clean the microfiber cloths
14
and the microfiber
cover
8
with a mild setting, up to 60°C.
After cleaning: Let all parts dry completely.
Removing limescale
If the steam power reduces drastically, it may
be needed to remove the limescale from the
product/accessories:
Switch off the product. Fill the water tank
18
with
a mixture of tap water and vinegar (ratio of 2:1).
Install the accessory you wish to remove the
limescale from (if any).
Secure the position of the product to ensure that
the steam is aimed away from the surrounding
objects and surfaces.
To Next Page
Loading...
