What to do if the safety valve 8 cannot be opened on Silvercrest SDR 1100 B2?
If the safety valve on your Silvercrest Steam Cleaner won't open, it's likely because the pressure in the water tank is too high. To resolve this, press the steam lever until all the steam is released.
How to fix low steam volume on a Silvercrest SDR 1100 B2?
If you notice a low steam volume from your Silvercrest Steam Cleaner, the temperature might be too low. Allow the appliance to heat up again.
Why does the green control lamp on my Silvercrest SDR 1100 B2 go on and off?
The green control lamp on your Silvercrest Steam Cleaner lighting up and then going out again is normal. This indicates that the temperature dropped briefly, and the appliance has started heating up again.
What to do if the safety valve on my Silvercrest SDR 1100 B2 Steam Cleaner cannot be opened?
If the safety valve on your Silvercrest Steam Cleaner cannot be opened, it indicates that the pressure in the water tank is too high. Press the steam lever until no more steam comes out to release the pressure.
What to do if water drips from the steam nozzle on my Silvercrest SDR 1100 B2?
If water is dripping from the steam nozzle of your Silvercrest Steam Cleaner, it's likely that the temperature is too low. Wait until the appliance has heated up again.
Indicates a potentially hazardous situation that could result in serious injury or death.
Indicates a potentially hazardous situation that could result in physical injury.
Essential precautions to prevent electric shock hazards during operation and maintenance.
Step-by-step instructions on how to safely add water to the appliance's tank.
General| Power | 1100 W |
|---|---|
| Water Tank Capacity | 350 ml |
| Weight | Approx. 1.46 kg (without accessories) |
| Cable length | 5 m |
| Steam Pressure | 3.5 bar |
To Next Page
