16 GB/IE/NI
Risk of product damage
Only use the specified battery type!
Insert the batteries according to the polarity marking (+) and (-)
on the battery and the product.
Clean the contacts on the battery and inside the battery compart-
ment before inserting!
Immediately remove drained batteries from the product.
Before first use
Note: Remove all packaging materials from the product.
Note: You can power the product using the included mains adapter
15
or using batteries.
Connecting the mains adapter to the mains
power supply
Note: Before connecting the mains adapter
15
to the mains power
supply, compare the connection information on the type plate of the
mains adapter
15
(voltage and frequency) with the information for
your electricity supply. Make sure the information matches to prevent
product damage.
Connect the coaxial power connector
16
of the mains adapter
15
with the mains adapter port
5
on the right side of the
product.
Plug the power supply
15
into a properly installed mains socket to
connect the product to the mains.
Inserting / replacing batteries
Remove the battery cover to open the battery compartment
6
at
the back of the product. If applicable, remove the used batteries.
To Next Page
Loading...
Need help?
General
