Silvercrest SDRF 10 B1 - Setting the Display Light

29 GB/IE/NI
Turn the jog dial control element
13
left or right to switch between
the various menu options. Select the respective menu option by
pressing the jog dial control element
13
.
Select your chosen settings and confirm each input by pressing the
jog dial control element
13
.
Press the Menu / Info button
9
again to return to the menu options
for other settings.
To return to playback mode, press the Menu / Info button
9
until
the product is in playback mode again. If no button is pressed after
the last entry, the product automatically returns to playback mode
after approx. 30 seconds.
Setting the display light
Press and hold the Menu / Info button
9
to open the menu options.
Turn the jog dial control element
13
left or right to switch to system
settings in the menu.
Press the jog dial control element
13
to confirm.
In system settings, turn the jog dial control element
13
left or right
to select the “Lighting“ function, and press the jog dial control ele-
ment
13
to confirm.
The following menu options will be displayed:
Menu option Available
settings
Function
Dim after
ON, 10, 20, 30,
45, 60, 90, 120,
180 seconds
The light for the colour
LCD
1
will dim after
this period.
Brightness
high, medium, low Sets the brightness of
the colour LCD
1
.