25 GB/IE
Use / Changing the batteries
Woman Man
Age Fat Water Fat Water Status
Body fat sta-
tus
≤ 30
4.0–16.0 % 66.0–57.8 % 4.0–11.0 % 66.0–61.2 % underweight
16.1–20.5 % 57.7–54.7 % 11.1–15.5 % 61.1–58.1 % thin
20.6–25.0 % 54.6–51.6 % 15.6–20.0 % 58.0–55.0 % normal
25.1–30.5 % 51.5–47.8 % 20.1–24.5 % 54.9–51.9 %
over-
weight
30.6–60.0 % 47.7–27.5 % 24.6–60.0 % 51.8–27.5 %
heavily
overweight
> 30
4.0–20.0 % 66.0–55.0 % 4.0–15.0 % 66.0–58.4 % underweight
20.1–25.0 % 54.9–51.6 % 15.1–19.5 % 58.3–55.3 % thin
25.1–30.0 % 51.5–48.1 % 19.6–24.0 % 55.2–52.3 % normal
30.1–35.0 % 48.0–44.7 % 24.1–28.5 % 52.2–49.2 % overweight
35.1–60.0 % 44.6–27.5 % 28.6–60.0 % 49.1–27.5 %
heavily
overweight
Note: This table merely refers to guideline values.
It has no medical relevance.
Note: If the notice „Errh“ appears during body fat
measurement, your body fat proportion is too low
and is not measurable.
Note: If the notice „Errh“ appears during body fat
measurement, your body fat proportion is too high
and is not measurable.
Note: The results can differ for the following users:
- Users under 10 years of age or over 70 years of
age
- Bodybuilders or professional athletes
Analysis measurement for existing users
Press the SET button
8
.
Press the
5
/
7
buttons to select the
user code (1–12).
Press the start button
6
.
Stand with two bare feet and an even distribu-
tion of weight on the electrodes
3
of the
scales.
Changing the batteries
Note: The scales feature a „Replace battery“
indicator. If you operate the scales with batteries
that are too weak, this will be indicated on the
LC display
1
by the value “(Lo)” (for the hand-
held unit
4
) or „bLo“ (for the scales).
Replace the used batteries with new batteries
of the same type (3 V
, CR2032 button
cells).
Proceed as follows:
Scales
1. Open the battery cover
12
on the back of the
scales.
2. Remove the exhausted batteries and dispose of
them as described in the section about “Dis-
posal”.
3. Place the new battery in the battery compart-
ment. Please note the polarity. The “+” symbol
must be visible on the top of the battery. Press
the battery gently downwards and close the
battery cover
12
.
Note: When you insert the battery, make sure
that the contacts do not get bent.
Use
To Next Page
Loading...
