GB
│
MT
│
67 ■
Activating/deactivating the multipoint function
The multipoint function is activated by default on delivery.
To disable the multipoint function:
♦ In standby mode, press the
button for approx. 3 seconds.
The operating LED lights up briefly orange before going
out completely. You will hear a low beep, followed by a series
of beeps decreasing in pitch. The hands-free set switches off
and multiple mobile phones can no longer be paired with the
device.
To enable the multipoint function:
♦ In standby mode, press the
button for approx. 3 seconds.
You will hear a rising series of beeps. The hands-free set can
now be paired with several mobile phones.
Call function
♦ Use your mobile phone to make a call in the usual way.
♦ To redial the last used number, press the multifunction button
twice in quick succession.
♦ To activate voice dialling, press the multifunction button
once briefly.
NOTE
► Voice dialling is only available with mobile phones that support
this function. For more information on voice dialling, refer to the
instruction manual of your mobile phone.
To Next Page
Loading...
Need help?
General
