45 GB/IE
Regularly charge the built-in battery if you do not use the product
for a long period of time. This is necessary to preserve the battery.
Only use the cleaning brush
18
for the cutter block
20
and never
for the shaving foil
1
. Otherwise it may become damaged.
Clean the shaving foil
1
by using the water and dry the shaving
foil in normal environment.
The cutter block
20
can be oiled (The oil not included) before use
and after cleaning to guarantee complete functionality.
Always switch off the product before oil the cutter block
20
(Fig.G).
Apply one or two drops of oil on the top of cutter block
20
and
distribute them evenly.
Wipe off any excess oil which is out of the cutter block
20
with a
cloth.
Note: Use any acid-free oil (such as sewing machine oil).
Warning: Keep the oil out of reach of chil dren. Do not ingest the
oil, do not get it into your eyes. Keep it in a safe place if it is not
being used.
Dry cleaning
Clean the shaving head
4
using the enclosed cleaning brush
18
after every use.
Press the release buttons
2
and remove the shaving foil frame
3
.
Carefully tap the shaving foil frame
3
to clean it.
Remove any leftover hair trimmings using the cleaning brush
18
.
Re-attach the shaving foil frame
3
to the product so that it clicks
into place (see Fig. F).
To Next Page
Loading...
