11 GB/IE/NI/CY
Do not operate the product
while it is being charged.
Always charge the product
in an open area away from
flammable materials and
liquids.
Misuse can cause fire and
burns.
The product is not to be used
if it has been dropped, if there
are visible signs of damage or
if it is leaking.
Protect the connection cord
against damages.
Do not let it hang over sharp
edges, do not squeeze or bend
it. Keep the connection cord
away from hot surfaces and
open flames.
Ensure that nobody can pull on
or trip over it unintentionally.
The connection cord of the
charger cannot be replaced.
If the connection cord is
damaged, the charger must be
disposed of.
Operation
Before using the product:
Disconnect the charger from
the wall outlet.
Keep the charging socket
closed with the stopper at all
times to ensure the product's
ingress protection against
splashing water.
Do not obstruct the ventilation
slots during operation. A
blocked ventilation circuit
can result in overheating and
damage to the product.
No action is needed from users
to shift the product between
50 and 60 Hz. The product
adapts itself for both 50 and
60 Hz.
Cleaning and storage
Do not pull the charger out
of the wall outlet by the
connection cord.
Protect the charger against
dust, direct sunlight, dripping
and splashing water. Protect
the product against dust and
direct sunlight.
To Next Page
Loading...
