13 GB/IE/NI/CY
Cleaning windows
Rotate the spray nozzle
5
to the desired
setting:
Spray nozzle
5
STREAM
Jet stream.
SPRAY
Water mist stream.
OFF
No stream.
Spray the window.
Wipe over the sprayed areas with the
wiper
4
. Loosen stubborn dirt.
Turning on/off
Turning the product on: Press
10
.
lights up blue.
Turning the product off: Press
10
again.
The blue light goes off.
Vacuuming windows
NOTES:
Do not hold the product upside down. Do
not move the product sideways.
The maximum capacity of the dirt water
container
8
is 270 ml. Stop operation when
the MAX marking of the dirt water container
is reached.
Turn on the product.
Move the blade of the vacuum
attachment
1
slowly from top to bottom.
When the MAX marking on the dirt water
container
8
is reached, turn off the product.
Empty the dirt water container
8
before
further operation.
NOTE: To empty the dirt water
container
8
, pull it out from the motor
unit
9
first. Remove the protective cap. Then,
empty the dirt water container.
Cleaning and care
m DANGER! Risk of electric shock!
Before cleaning: Always disconnect the
product from the charger
2
.
m WARNING! Do not immerse the product’s
electrical components in water or other
liquids. Never hold the product under
running water.
Do not use any abrasive, aggressive cleaners
or hard brushes to clean the product and its
accessories.
Cleaning the vacuum attachment
1
,
suction head
12
and motor unit
9
Press the release button
13
to remove the
vacuum attachment
1
from the suction
head
12
.
Press the eject buttons
11
to remove the
suction head
12
from the motor unit
9
.
Wipe down the parts with a slightly damp
cloth.
Do not let any water or other liquids enter
the product interior.
After cleaning: Let all parts dry completely.
Cleaning the water container
6
, dirt
water container
8
and wiper
4
Rinse the parts in water and/or mild
detergent.
After cleaning: Let all parts dry completely.
Cleaning the microfiber covers
The microfiber covers
3
can be cleaned in a
washing machine and in a dry cleaner.
To Next Page
Loading...
