10
GB
7. Cleaning and
maintenance of the
device
DANGER! Risk of electric
shock!
~ The shaving head|3 can be cleaned
under running water. Disconnect the
device from the plug-in power unit ca-
ble|13 prior to doing so.
~ The plug-in power unit and the corre-
sponding cable|13 must not be held
under running water and must not be
immersed in other liquids.
WARNING! Risk of material damage!
~ Do not use any astringent or abrasive
cleaning agents.
~ Do not place excessive pressure on the
shaving foils|1. They are thin and can
be damaged easily.
~ Use the cleaning brush|14 for clean-
ing the cutter block|12 only. Under no
circumstances should the shaving
foils|1 be cleaned with it.
NOTE: to ensure a consistently smooth
shave, the device must be cleaned and
maintained regularly.
Cleaning after every dry shave
1. Press both release buttons|4 and take
off the shaving foil frame|2.
2. Tap the shaving foil frame|2 carefully.
3. Clean the cutter blocks|12 with the
cleaning brush|14.
4. Place the shaving foil frame|2 on the
device in such a way that it locks into
place.
Cleaning after every wet shave/
occasionally after dry shave
1. If necessary, wipe the device (not the
shaving foils|1) with a slightly mois-
tened cloth.
2. Press the release button|9. The shaving
head|3 opens up.
3. Hold the device facing down and rinse
the cutter blocks|12 and the shaving
foil frame|2 in the shaving head|3 un-
der running water.
4. Allow the parts to dry completely.
• Depending on the intensity of usage,
but at least every 6 months, carefully
spread a small amount of sewing ma-
chine oil on the shaving foils|1, the cut-
ter blocks|12 and the long hair
trimmer|11.
8. Storage
DANGER!
~ Keep the device out of the reach of
children.
• When the device is not being used,
place the protective lid|10 on the shav-
ing head|3.
• The device and accessories can be
stored in the storage bag|15.
BB*5$B+HUUHQUDVLHUHUB%ERRN6HLWH)UHLWDJ-XQL
To Next Page
Loading...
