Silvercrest SFS 16 C3 - Mounting the Transmitter

SFS 16 C3
GB
│
IE
│
NI
│
CY
│
19 ■
Mounting the transmitter
♦ Select a suitable positioning for the sender, close to
your outer door.
♦ Mark the positions for the required drill holes with the
help of the mounting plate 3 and drill the holes for
the supplied wall plugs 0 (5mm drill).
♦ Push the wall plugs into the drill holes and screw the
mounting plate 3onto the wall using the screws 6.
♦ Push the transmitter onto the mounting plate 3 until it
clicks audibly into place.
NOTE
► Alternatively, you can mount the transmitter onto a
suitable surface using the double-sided adhesive
tape !.