US - EN │ 15 ■
Adjusting the signal sound volume
Press the VOL button 4 repeatedly until the
desired volume is set.
Loud Medium Quiet
Selecting the doorbell melody
There are 52 different doorbell melodies
stored in the appliance.
♦ Press the melody select button 5.
♦ Stop the selection when you hear the
desired melody. The appliance will use the
last-played melody.
▯ If you remove the receiver from the power
socket, the set melody remains saved for
approximately 40 seconds. After this time,
you need to set your desired melody anew.
To Next Page
Loading...
