■ 6
│
GB
│
CY
SFW 350 C1
Assembly / Disassembly
CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
first time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.
NOTICE
► Before using for the first time, remove the protective foil from the control panel.
Assembling the meat grinder
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw in the meat grinder casing .
2) Place the spring onto the transport screw .
3) Then fit the cross blade on so that the sharp side points away from the
spring . Ensure that the square opening in the cross blade is placed
correctly on the square axle.
WARNING! RISK OF INJURY!
► The cross blade is very sharp! Risk of injury!
CAUTION - PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade is inserted the other
way around!
4) Select the appropriate cutting disc /sausage disc 3.
To Next Page
Loading...
