EasyManua.ls Logo

Silvercrest SGBR 1500 A2 - Appliance Functions; Function Switch Usage; Temperature Control; Timer Operation

Silvercrest SGBR 1500 A2
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
SGBR 1500 A2
GB
IE
Operating the appliance
Function switch
You can switch on the appliance with the function
switch , and also set 5 different functions:
Symbol Meaning
"Upper heat"
e.g. to gratinate
"Lower heat"
e.g. for baking
"Upper & lower heat"
e.g. for baking a pizza
"Upper heat/hot air/
rotisserie"
e.g. to roast poultry
"Upper & lower heat/hot air"
e.g. to reheat rolls
OFF
"OFF" the appliance is
switched off.
Temperature control
Use the temperature control to set the desired
temperature.
If you set the temperature for the functions
“Upper heat”
, “Lower heat” or “Upper &
lower heat”
use the scale marked with “ ”.
If you set the temperature for the functions
“Upper heat/hot air/rotisserie”
or
“Upper & lower heat/hot air”
use the scale
marked with “ ”.
Timer
User the timer to set the cooking time.
Set the timer to the desired cooking time.
After expiry of the set time a signal tone sounds
and the appliance stops heating.
If the function “Upper heat/hot air/rotisserie”
is selected, the rotisserie 6 will also stop
turning.
Grilling and baking
1) Put the crumb tray into the appliance.
2) Remove the rack ! and baking tray - from
the appliance. If required, cover these with
baking paper or lightly grease the baking tray -
with suitable baking fat.
NOTE
Depending on the meal, the oven must be
preheated. Refer to the guidelines in the
respective recipe. Preheating is useful for:
very short baking times,
crisp crusts,
sensitive meals that require a constant
temperature, such as soufflés.
If no preheating is required, skip step 3).
3) Allow the appliance to heat up for approx.
10 minutes (depending on the temperature
setting) to the required temperature:
Select the required temperature using the
temperature control . Ensure that you use
the correct scale (see chapter “Temperature
control”).
Select the required function with the function
switch .

Table of Contents

Related product manuals