Silvercrest SIKP 2000 F1 KAT - Page 44

SilverCrest SIKP 2000 F1 KAT
42 - English
Never wrap the power cable (1) around the
heating zone (2).
 Make sure that the power cable (1) cannot
become crushed or squashed.
 Even when switched off, the induction
hotplate is not entirely disconnected from
the mains socket. To disconnect it
completely from the mains, remove the
mains plug from the mains socket.
 When disconnecting the power supply,
always pull on the plug and never on the
power cable (1) itself.
 Always remove the plug from the mains
socket if you have any problems, if you are
not using the device, before cleaning and
during thunderstorms.
 If you notice visible damage to the induction
hotplate or the power cable (1), switch the
device off, disconnect the mains plug from