To Next Page
J
Jodi MooreSep 13, 2025
What to do if E4 is shown on the Silvercrest SDI 3500 A1 display?
- MMichael NovakSep 13, 2025
If E4 is shown on the display of your Silvercrest Hob, it indicates that the appliance is not being supplied with enough voltage (
What to do if E4 is shown on the Silvercrest SDI 3500 A1 display?
If E4 is shown on the display of your Silvercrest Hob, it indicates that the appliance is not being supplied with enough voltage (
What to do if Silvercrest SDI 3500 A1 displays E0?
The E0 error code means that there is no vessel on the hob. Place a suitable vessel on the respective hob.
What does error E3 mean on my Silvercrest SDI 3500 A1 Hob?
If E3 is displayed on the Silvercrest Hob, this indicates that the appliance is receiving too much voltage (above 270V). Check that the hob is connected to a correctly installed mains power socket that provides 220–240 V , 50 Hz.
Why is my Silvercrest Hob not starting to cook?
If your Silvercrest Hob isn't starting the cooking process, ensure that you have a suitable vessel placed on the hob. The hob needs a compatible vessel to start the cooking process. If the issue persists, make sure the vessel is suitable for induction hobs.
Why does my Silvercrest Hob show E5 or E6?
The E5 or E6 error code indicates that the appliance has overheated. Disconnect the plug from the mains power socket and allow the appliance to cool down. If the problem persists, contact Customer Services and specify the error code.
What to do if Silvercrest SDI 3500 A1 displays E3?
The E3 error code means the appliance is receiving too much voltage (greater than 270 V). Verify that the hob is connected to a correctly installed mains power socket with 220–240 V ~, 50 Hz.
What to do if Silvercrest Hob displays E4?
The E4 error code indicates that the appliance is not receiving enough voltage (less than 150 V). Check that the hob is connected to a correctly installed mains power socket with 220–240 V ~, 50 Hz.
What to do if Silvercrest SDI 3500 A1 Hob shows E4 error?
If the Silvercrest Hob displays error code E4, it indicates that the appliance isn't getting enough voltage (less than 150V). Make sure the hob is connected to a properly installed mains power socket that supplies 220–240 V ~, 50 Hz.
Why does my Silvercrest SDI 3500 A1 Hob show E3 error?
If the Silvercrest Hob displays error code E3, it means the appliance is receiving too much voltage (above 270V). To resolve this, verify that the hob is connected to a correctly installed mains power socket providing 220–240 V ~, 50 Hz.
What does E0 mean on Silvercrest SDI 3500 A1 Hob?
If the Silvercrest Hob displays 'E0', it indicates that there is no vessel on the hob or the vessel is not suitable for induction cooking. Place a suitable vessel on the hob.
Appliance intended for heating food and keeping warm in private homes.
Details requirements for cookware (magnetic, flat base, size) for optimal induction performance.
Guidance on connecting the appliance to the mains power socket and safety precautions.
Step-by-step guide to placing vessels and starting the appliance.
Automatic shut-off mechanism when a cooking vessel is removed or not detected.
General| Power | 3500 W |
|---|---|
| Type | Induction |
| Temperature Range | 60°C - 240°C |
| Material | Glass ceramic |
| Control type | Touch |
| Safety features | Child lock, overheat protection, auto shut-off |
