To Next PageTo Next PageWhat to do if E5 or E6 is shown on the Silvercrest Hob display?
If E5 or E6 is displayed on your Silvercrest Hob, it indicates that the appliance has overheated. Disconnect the plug from the mains power socket and wait until the appliance has cooled down.
Why my Silvercrest Hob does not start the cooking process?
If your Silvercrest Hob doesn't start the cooking process, it could be due to the absence of a vessel on the hob. Make sure to place a suitable vessel on the hob. Another reason might be that the vessel isn't suitable for induction hobs. Ensure you are using a suitable vessel.
What to do if Silvercrest SDI 3500 A1 Hob displays E2 error?
If E2 is shown on the display of your Silvercrest Hob, it indicates that the temperature sensor beneath the hob is defective or there is a short circuit. Disconnect the plug from the mains power socket and contact the Customer Service department.
Why does my Silvercrest SDI 3500 A1 show error E4?
If E4 is displayed on the Silvercrest Hob, it means the appliance is not getting enough voltage (less than 150V). Check and ensure that the appliance is connected to a properly installed mains power socket with 220–240 V , 50 Hz.
What to do if my Silvercrest Hob is not working?
First, ensure the hob is properly connected to a mains power socket. If it still doesn't work, the appliance may be damaged, and you should contact the Customer Service department.
What does error E3 mean on my Silvercrest SDI 3500 A1 Hob?
If E3 is displayed on the Silvercrest Hob, this indicates that the appliance is receiving too much voltage (above 270V). Check that the hob is connected to a correctly installed mains power socket that provides 220–240 V , 50 Hz.
Why does my Silvercrest Hob show error E5 or E6?
If E5 or E6 is displayed on your Silvercrest Hob, it means the appliance has overheated. Disconnect the plug from the mains power socket and allow the hob to cool down completely. If the error persists, contact Customer Services, specifying the error code.
What to do if Silvercrest SDI 3500 A1 Hob does not start the cooking process?
If your Silvercrest Hob doesn't start cooking, ensure that a suitable vessel is placed on the hob. Also, verify that the vessel is compatible with induction hobs; refer to the "Suitable cookware" section for guidance.
How to fix a Silvercrest SDI 3500 A1 Hob when it's not working?
If the Silvercrest Hob isn't working and the indicator light is off, first, make sure the appliance is properly connected to a functioning mains power socket. If it still doesn't work, the appliance may be damaged, and you should contact the Customer Service department.
What to do if Silvercrest SDI 3500 A1 Hob displays E2?
The E2 error code indicates that the temperature sensor beneath the hob is defective or there is a short circuit. Disconnect the plug from the mains power socket and contact the Customer Service department.
General| Power | 3500 W |
|---|---|
| Type | Induction |
| Temperature Range | 60°C - 240°C |
| Material | Glass ceramic |
| Control type | Touch |
| Safety features | Child lock, overheat protection, auto shut-off |
Appliance intended for heating food and keeping warm in private homes.
Details requirements for cookware (magnetic, flat base, size) for optimal induction performance.
Guidance on connecting the appliance to the mains power socket and safety precautions.
Step-by-step guide to placing vessels and starting the appliance.
Automatic shut-off mechanism when a cooking vessel is removed or not detected.
