To Next Page

To Previous Page

SDI 3500 A1

Child safety lock

To prevent unauthorised switching on or setting modiﬁcation, for instance by

children, this appliance is ﬁtted with a child safety lock.

NOTE

► It does not matter whether you activate the child safety lock using the but-

tons "+" % and "-" 6 or using the buttons "+" 6 and "-" %. All buttons,

except the "ON/OFF" button !, are always locked.

NOTE

► You can also the child safety lock as a safe-wipe function:

Before you wipe the buttons with a damp cloth, activate the child safety

lock. This helps avoid any inadvertent activation of buttons.

When the appliance is in operation:

■ Press the “+” -/% and “-” /6 buttons together. “Loc” (LOCK), alternating

with the set power level/temperature, will show on the display /1.

Now all buttons, including the “ON/OFF” button ! are locked.

■ If a single hob / is activated, the respective display /1 shows

“Loc” (LOCK), alternating with the set power level/temperature. “Loc” is

permanently shown on the display /1 of the hob / that is not in

operation.

■ To deactivate the child safety lock, press the “+” -/% and “-” /6 buttons

together. The buttons can now be activated again.

When the appliance is switched oﬀ:

■ Press the “ON/OFF” button ! to switch on the appliance.

■ Press the “+” -/% and “-” /6 buttons together. “Loc” (LOCK) appears

on the display /1. Now, all buttons, except the “ON/OFF” button !

are locked. After 10 seconds, the appliance will switch itself oﬀ.

■ If you press the “ON/OFF” button ! again in order to switch the appli-

ance on, the display shows /1 “Loc”, and the buttons remain locked. To

deactivate the child safety lock, press the “+” -/% and “-” /6 buttons

again together. The buttons can now be activated again.

When the timer is in operation:

■ Press the “+” -/% and “-” /6 buttons together. “Loc” (LOCK), alternating

with the current timer time, will show on the display /1.

■ To deactivate the child safety lock, press the “+” -/% and “-” /6 buttons

again together. The buttons can now be activated again.

Silvercrest SDI 3500 A1 User Manual

Questions and Answers: