■ 6
│
GB
│
IE
Package contents
The appliance is supplied with the following
components as standard:
▯ Induction milk frother
(milk container, lid, base, whisk)
▯ Operating instructions
Note: Check the package for completeness
and signs of visible damage. If the delivery
is incomplete or damage has occurred as a
result of defective packaging or during trans-
port, contact the Customer Service hotline
(see Service section).
Unpacking
DANGER! Do not allow children to play
with packaging materials. There is a risk
of suffocation.
♦ Remove all parts of the appliance and the
operating instructions from the box.
♦ Remove all packaging material.
♦ Clean the appliance as described in the
section Cleaning.
Appliance description
(See fold-out page for illustrations)
1 Lid with sealing ring
2 Whisk
3 Milk container
4 Base
5 Indicator light
(warm frothing)
6 Indicator light
(heating milk)
7 Indicator light
(cocoa)
8 Indicator light
(cold frothing)
9 Function button
0 Cable retainer
Setting up
♦ If you have not already done so, unwind
the power cord from around the cable
retainer 0 and guide it through the recess
on the base 4.
♦ Place the appliance on a dry and level
surface. Ensure that the plug is within easy
reach.
♦ Move the spiral on the whisk 2 to the
desired position (see Fig. 1):
– Lower position for the functions "warm
frothing", "heating milk" and "cocoa".
– Upper position for the function "cold
frothing".
Ensure that it rests firmly in the grooves.
Fig. 1
♦ Push the whisk 2 onto the drive shaft
inside the milk container 3.
♦ Plug the plug into a power outlet. A beep
will sound.
The appliance is now ready for use.
To Next Page