EasyManuals Logo

Silvercrest SKF 2300 A1 User Manual

Silvercrest SKF 2300 A1
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
- 6 -
Note:
The frying process can be overseen through the
viewing window 1 in the appliance lid.
Solid Cooking Fats
To avoid a spraying of the fat and that the appliance
becomes too hot, please take the following precau-
tions when using solid frying fat:
When replacing old fat with fresh, first melt the
fresh blocks of fat slowly, under low heat, in a
separate pan. Then carefully pour the molten fat
into the deep fryer. When this has been done,
insert the power plug into a socket and switch
the deep fryer on.
After use, store the deep fryer with the solidified
fat at room temperatures.
Should the fat become too cold, it could cause
splattering on remelting! To avoid this, poke a few
holes into the solidified fat with a wooden or plastic
spatula. Ensure that no damage is caused to the
heating element.
To melt the fat, switch the appliance on with the
On/Off switch 0 and then adjust the temperature
regulator 8 to 130˚C. The control lamp 9 starts
to glow.
Wait until all of the fat has melted. First then set
the desired frying temperature.
Timer
You can programme in a countdown of up to 60 mi-
nutes with the timer q:
Press the button " " on the timer to switch it on.
Press the buttons "+" and "-" to set the desired
time in minutes.
Press on the button " " to start the countdown
of the time. The programmed time will blink twice
to indicate that the countdown of the time has
begun.
2 signal tones sound on completion of the countdown.
The short-period timer q switches itself off automati-
cally.
Note:
On expiry of the countdown the heating element 5
is NOT switched off! Therefore pay heed to the signal
tone from the short-period timer q, so as to avoid
spoiling the food being fried.
Note:
When the battery is discharged, exchange it. Always
use a replacement battery of the same type. Pay
heed to the correct polarity when inserting it.
After Frying
When the food is ready, pull the handle upwards
until the handle locking button w engages.
Leave the frying basket 3 in this position to drip
off.
Press the On/Off switch 0. The deep fryer is
now switched off. Remove the power plug from
the wall socket.
When the food has dripped off, open the ap-
pliance lid by pressing the lid release button 6.
IB_SKF2300A1_49370_LB6 03.05.2010 12:31 Uhr Seite 6

Other manuals for Silvercrest SKF 2300 A1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SKF 2300 A1 and is the answer not in the manual?

Silvercrest SKF 2300 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSKF 2300 A1
CategoryFryer
LanguageEnglish

Related product manuals