16
SKGE 2000 B2
GB
IE
Clean the hotplates which have been removed in warm water with a little
detergent in it. For severe incrustations, leave the hotplates to soak for a while
in the water. After washing, rinse the hotplates with clean water to remove all
detergent residues. Dry everything properly. The hotplates must be dry before
you put them back in the appliance!
NOTE
For gentle cleaning of the hotplates, we recommend that you wash them by
hand, as described above. You can, however, also clean the hotplates in
the dishwasher.
To refit the hotplates, place the hotplates onto the base such that both
notches next to the fat outlet grip the hooks on the base. Then press down the
front part of the hotplate until you hear it engage.
Proceed in the same way with the second hotplate.
■ A damp cloth is sufficient for cleaning the exterior surfaces of the appliance.
Ensure that all parts are completely dry before re-using the appliance.
■ Wipe the cleaning scraper 3 with a damp cloth. For more stubborn soiling,
add some mild detergent to the cloth or rinse it in warm water and detergent.
Storage
Store the cleaned appliance in a dry place.
Lock the appliance by sliding the safety catch to the position
.
To Next Page
Loading...
