What to do if Silvercrest Grill is not working?
If your Silvercrest Grill isn't working, first ensure it's properly connected to a mains power socket. If it is connected, make sure the On/Off button is activated. If these steps don't resolve the issue, it may be damaged, and you should contact Customer Service.
Why does error code "(5\u0003\u0015" appear on Silvercrest SKGET 2000 A1 Grill?
The error code "(5\u0003\u0015" on your Silvercrest Grill indicates that the overheating protection has been triggered. Disconnect the plug from the mains power socket and wait until the appliance has cooled down. If the appliance still does not function after cooling down, contact the Customer Service department.
What to do if error code "(5\u0003\u0016" appears on Silvercrest Grill?
If the error code "(5\u0003\u0016" appears on the display of your Silvercrest Grill, it means that the grill thermometer is not correctly connected. To fix it, press the thermometer button again or connect the grill thermometer to exit error mode.
What to do if error code "(5\u0003\u0017" appears on Silvercrest SKGET 2000 A1 Grill?
If the error code "(5\u0003\u0017" appears on your Silvercrest Grill, it means the grill thermometer has measured a core temperature of over 180°C. Remove the grill thermometer from the food or heat source. Then, switch the appliance on again if you want to continue using it.
What to do if error code "(5\u0003\u0014" appears on Silvercrest SKGET 2000 A1?
The error code "(5\u0003\u0014" indicates a short circuit; the appliance is damaged. Disconnect the plug from the mains power socket and contact the Customer Service department.
Why is my Silvercrest Grill not working?
If your Silvercrest Grill isn't working, first ensure it's properly connected to a mains power socket. If it is, check that you've pressed the On/Off button. If the grill is still not working, it may be damaged and require contacting Customer Service.
What to do if Silvercrest SKGET 2000 A1 shows error (5 and switches off?
If the error code "(5" appears on the display and you hear beeps, and the appliance switches to standby mode and "OFF" appears on the display, it means that the grill thermometer has measured a core temperature of over 180°C. Remove the grill thermometer from the food you are grilling or from the heat source and switch the appliance on again if you want to continue using it.
Why does my Silvercrest SKGET 2000 A1 display error (5 and beep?
If the error code "(5" appears on the display and you hear beeps, it means that the overheating protection has been triggered. Disconnect the plug from the mains power socket and wait until the appliance has cooled down. If the appliance still does not function after cooling down, contact the Customer Service department.
How to fix error (5 on Silvercrest SKGET 2000 A1?
If the error code "(5" appears on the display and you hear beeps, it indicates that the grill thermometer is not correctly connected. To resolve this, press the thermometer button again or connect the grill thermometer to exit error mode.
Details about the purpose and content of the operating instructions.
Specifies the appliance's authorized purpose and explains hazard warning symbols.
General safety precautions for using the appliance to prevent injury or damage.
Lists included parts and instructions for checking package for damage.
Identifies all the parts of the appliance with corresponding numbers.
Guidelines for safe and hygienic food preparation before appliance use.
Steps for initial setup and first-time operation of the appliance.
Explains the control panel layout and basic appliance operation.
Detailed steps for setting temperature, timer, core temp, and programmes.
Guidance on cooking times and temperatures for various foods.
Instructions for using the appliance in the contact grill mode.
Instructions for using the appliance in the panini grill mode.
Instructions for using the appliance in the table grill mode.
Guide on using the thermometer to check food's internal temperature.
Advice for enhancing grilling results and saving energy.
Detailed steps for cleaning the appliance and its accessories.
Proper methods for storing the appliance when not in use.
A collection of recipes designed for use with the grill.
Information on how to dispose of the appliance responsibly.
Key technical data of the appliance, including power and consumption.
Solutions for common problems, error codes, and malfunctions.
Details on warranty coverage, claims process, and customer service contacts.
General| Brand | Silvercrest |
|---|---|
| Model | SKGET 2000 A1 |
| Category | Grill |
| Language | English |
To Next Page