Silvercrest SKGET 2000 A1 User Manual

SKGET 2000 A1
GB
│
IE
│
29 ■
Appendix
Technical specifications
Power supply 220–240 V
~
(AC) 50/60 Hz
Power consumption 2000 W
All of the parts of this appliance that come into
contact with food are food-safe.
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The appliance is not
working.
The appliance is not connected
to a mains power socket.
Connect the appliance
to a mains power socket.
The appliance is damaged.
Contact the Customer
Service department.
The On/Off button
6
has not been activated.
Press the On/Off button
6.
The error code "(5"
appears on the display
and you hear beeps.
There has been a short circuit;
the appliance is damaged.
Disconnect the plug from
the mains power socket and
contact the Customer Service
department.
The error code "(5"
appears on the display
and you hear beeps.
The overheating protection has
been triggered.
Disconnect the plug from
the mains power socket
and wait until the appliance
has cooled down. If the
appliance still does not
function after cooling down,
contact the Customer Service
department.
The error code "(5"
appears on the display
and you hear beeps.
The grill thermometer r is not
correctly connected.
Press the thermometer button
D again or connect the grill
thermometer r to exit error
mode.
The error code "(5"
appears on the display
and you hear beeps.
The appliance switches to
standby mode and "OFF"
appears on the display.
The grill thermometer r has
measured a core temperature
of over 180°C.
Remove the grill thermometer
r from the food you are
grilling or from the heat
source and switch the appli-
ance on again if you want to
continue using it.
If the malfunction cannot be corrected using any of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.

Silvercrest SKGET 2000 A1 Specifications

General

Brand	Silvercrest
Model	SKGET 2000 A1
Category	Grill
Language	English