SKGE 2000 C3
■ 16
│
GB
│
IE
│
NI
│
CY
Clean the hotplates which have been removed in warm water with a little
detergent in it. For severe incrustations, leave the hotplates to soak for a while
in the water. After washing, rinse the hotplates with clean water to remove all
detergent residues. Dry everything properly. The hotplates must be dry before
you put them back in the appliance!
NOTE
For gentle cleaning of the hotplates, we recommend that you
wash them by hand, as described above. You can, however, also
clean the hotplates in the dishwasher.
To refit the hotplates, place the hotplates onto the base such that both
notches next to the fat outlet grip the hooks on the base. Then press down the
front part of the hotplate until you hear it engage.
Proceed in the same way with the second hotplate.
■ To clean the outer surfaces of the appliance, wipe it down with a damp cloth
and a small amount of washing-up liquid. Wipe off any detergent residues
using a cloth moistened with clean water.
Ensure that all parts are completely dry before re-using the appliance.
■ Wipe the cleaning scraper 3 with a damp cloth. For more stubborn soiling,
add some mild detergent to the cloth or rinse it in warm water and detergent.
NOTE
For gentle cleaning of the cleaning scraper 3 we recommend that
you wash it by hand as described above. You can, however, also
clean the cleaning scraper 3 in the dishwasher.
■ Clean the emptied fat collector tray in hot water and washing-up liquid.
Rinse off detergent residues with clean water and dry it well.
NOTE
For gentle cleaning of the fat collector tray we recommend that
you wash it by hand as described above. You can, however, also
clean the fat collector tray in the dishwasher.
Storage
Store the cleaned appliance in a dry place.
Lock the appliance by sliding the safety catch to the position
.
To Next Page
Loading...
