Silvercrest SKKM 200 A1 - Using the Portafilter Holder; Portafilter Holder Installation; Portafilter Grinding Process; Cleaning

■ 8
│
GB
│
IE SKKM 200 A1
Using the portafilter holder
If you use a espresso machine with a portafilter
to prepare your coffee, you can fill the portafilter
directly with coffee powder. The portafilter holder
w is suitable for portafilters with an outer diameter
of approx. 60 mm (without fins).
1) Push the portafilter holder w as far as the stop
into the guide rails next to the output opening 7
with the opening facing forwards. Then slide
the portafilter between the guide rails of the
portafilter holder w:
2) Use the dial 9 to set a coffee powder quantity
of 1 or 2 cups. Refer to the operating instructions
of your espresso machine for the required
quantity.
3) Press the start/stop button 0 to start the
grinding process. We recommend filling the
portafilter in several small steps in order to dose
the coffee powder precisely. Use the start/stop
button 0 to stop the grinding process or
start it again.
4) Remove the portafilter and compact the coffee
powder with the stamp/tamper of the coffee
spoon z.
5) If the desired fill level is not yet reached, push
the portafilter back into the portafilter holder w
and start a new grinding process.
Stop the grinding process by pressing the start/
stop button
0. Finally, compact the coffee
powder again with the stamp/tamper of the
coffee spoon z.
6) Once you have ground enough coffee beans,
turn the dial 9 to the OFF position and remove
the mains plug from the socket.
Cleaning
RISK OF ELECTRIC SHOCK
► Before cleaning the appliance, always pull
out the plug from the mains power socket.
►
Never immerse the appliance in water
or other liquids!
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These can irreparably damage
the surfaces!
► Do not moisten the grinding mechanism 4/
5 to clean it!
NOTE
► If there are still coffee beans in the coffee
bean container 2, do not simply remove it in
order to empty it out completely. The coffee
beans would fall out of the coffee bean
container 2. Instead, remove the lid 1 and
pour the beans into a large bowl, for example.
Store the coffee beans in an airtight container
to preserve the aroma.
1) If the appliance is still plugged in, remove the
power plug from the mains power socket.
2) Turn the coffee bean container 2 anticlockwise
until the ▼ arrow on the coffee bean container
2 is above the
symbol on the appliance.
Pull the coffee bean container 2 upwards and
off the appliance.