Silvercrest SKM 350 A1 - Cleaning; Storage

10
GB
8. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric
shock!
~ Pull the mains plug14 out the wall
socket before cleaning the food proces-
sor.
~ The motor block15, the power cable
and the mains plug14 must not be im-
mersed in water or any other liquids.
DANGER! Risk of injury from
cutting!
~ When washing manually, the water
should be sufficiently clear that you can
see the blades4,5 and8 easily.
WARNING! Risk of material dam-
age!
~ Do not use any astringent or abrasive
cleaning agents.
Dismantling the device
1. Pull out the mains plug14.
2. Turn the bowl11 anti-clockwise, until
the symbol 16 points to the bottom
marking on the bowl12.
3. Hold the bowl11 tightly. Turn the lid3
anti-clockwise, until the symbol 2
points to the top marking on the
bowl10. Remove the lid.
4. Carefully remove the dough blade7,
the blade insert8 or the insert holder6
with attached slicing insert4 / grating
disk5. Remove the drive axle9.
5. Figure F: turn the insert holder6
around and hold it over a washable,
scratch-proof surface. Press the extending
edges of the slicing insert4 / grating
disk5 inwards and press it out.
How to clean properly
1. If necessary, wipe down the motor
block15 and the power cable14 with
a damp cloth. Ensure that the motor
block15 is completely dry before the
next time it is used.
2. Wash all other parts by hand in warm
water and a little detergent.
3. Allow all parts to dry completely before
you put them away or use the device
again.
Some cleaning tips
• Clean the device as soon as possible af-
ter use in order to prevent food rem-
nants from drying on.
• After processing very salty or acidic
foodstuffs, the dough blade7 / blade
insert8, the insert holder6 and the slic-
ing insert4 / grating disk5 should be
washed thoroughly and right away.
9. Storage
DANGER for children!
~ Keep the device out of the reach of chil-
dren.
DANGER!
~
In order to avoid accidents, the mains
plug
 14 must never be connected to a
wall socket while in storage.
• Assemble the food processor for stor-
age. This allows the blade insert
 8 to be
stored safely.
• Select a location where neither high
temperatures nor moisture can affect the
device.
• Figure G: the power cable14 can be
wound up on the cable spool in the
housing cover of the motor block15.
__CPE273409_Kuechenmaschine_B6.book Seite 10 Dienstag, 17. November 2015 12:15 12