16
GB
~ Do not change the position of the de-
vice, as long as there is still food or
dough in the device.
~ Never overfill the blender jug or mixing
bowl, since otherwise the contents could
be ejected. Overflowing liquid would
flow onto the surface. You should there-
fore place the device on a waterproof
surface.
~ Do not operate the device when it is
empty, as this causes the motor to over-
heat and may result in it becoming dam-
aged.
~ Never fill the blender jug with hot or
boiling material.
~
Only use the original accessories.
~ Do not use any astringent or abrasive
cleaning agents.
~ The beater and dough hook have a non-
stick coating. Do not damage them with
sharp, pointed or scratching objects
(e.g. knife, pot sponge).
~
The device is equipped with non-slip plas-
tic suction feet. As furniture is coated with
a wide array of varnishes and plastics
and is also treated with different care
products, it cannot be fully ruled out that
some of these materials contain ingredi-
ents that could attack and soften the non-
slip plastic suction feet. If necessary,
place a non-slip mat under the device.
Using the mixing tools
Lifting up the drive arm
1. Press the unlock button11 and fold up
the drive arm19.
Inserting the mixing bowl
2. Put the mixing bowl16 into the base
unit17.
3. Lock the mixing bowl16.
Mounting the splash guard
4. Place the splash guard18 on the drive
arm19 from below and turn it until it
clicks into place.
Inserting the mixing tool
5. Select the appropriate mixing tool:
- Dough hook22: for heavy batter
-Whisk21: for whipping
- Beater20: for medium to light batter
__367924_367925_2101_Kuechenmaschine_B8_KURZ.book Seite 16 Freitag, 26. März 2021 8:42 08
To Next Page
Loading...
