18
GB
3. Turn it anticlockwise at the two han-
dles25 until it stops.
Note that the lower ridges26 at the
base of the blade assembly7 must en-
gage under the upper ridges27 in the
blender jug5. Check that it is secure.
Mounting the blender jug
1. Reach into the recessed grip and re-
move the cover8 upwards.
2. Position the blender jug5 on the drive
unit9 so that the white arrow (T) on
the bottom of the blender jug points to
the open lock symbol.
3. Turn the blender jug5 clockwise until it
is firmly in place. The white arrow (T)
now points to the closed lock symbol.
Adding ingredients
• First add the liquid ingredients to the
blender jug5, and then the solid ones.
• Cut the solid ingredients into small piec-
es in advance, so that the pieces do not
get jammed in the blades.
• During blending, you can add ingredi-
ents through the refill opening3 in the
lid2.
Mounting the lid
NOTES:
• For safety reasons, the blending process
will only start when the lid2 is correctly
mounted.
• To make it a little easier to close the
lid2, place a few drops of cooking oil
onto a cloth and rub it over the seal4.
__367924_367925_2101_Kuechenmaschine_B8_KURZ.book Seite 18 Freitag, 26. März 2021 8:42 08
To Next Page
Loading...
