Silvercrest SKS 4 A1 - Controls; Activating;deactivating alarm signals

■ 10
│
GB
│
IE
│
NI
SKS 4 A1
Controls
Overview
Overview of the buttons and switches on the back of the appliance:
Key Function
Main switch
!
► Switch alarm signals on and off:
Activate alarm with light and sound,
switch on light;
Activate alarm with light only (no sound),
switch on light;
Deactivate alarm (no light, no sound),
switch off light
Lullaby button
3
► Press and hold for 3 seconds to play the set
lullaby; press again to stop (otherwise stops
automatically after 10 minutes)
SET button

► Press and hold for 3 seconds to call up the
menu
► Press to confirm menu entries
Arrow buttons ▲ ▼
-
► In the standard display: display set alarm
times
► In the menu: navigate in the respective menu
► keep pressed for fast scrolling
SW button

► Switch between face and time on the
display

W./W.E. slider switch 
► Change alarm time mode:
W. = weekdays (Mon–Fri)
W.E.= weekend (Sat/Sun)
slider switch  ► Set the brightness of the display 
Activating/deactivating alarm signals
You can set how and if the alarm should be switched on with the main switch
!:
Ŷ Set the main switch
!to the position if the wake-up time and bedtime are
to be displayed with light and sound. At the set wake-up or bedtime, sounds
or a melody will play for approx. 10 minutes. In addition, the upper part of
the motif disc
.with the awake image is illuminated at wake-up time and
the lower part with the sleeping image at bedtime.